Quincy Desiccant Dryers

Quincy desiccant dryers provide air purification from -40°F PDP down to -100°F PDP. These dryers are built and designed to provide the smallest footprint possible while ensuring maximum performance. Quincy desiccant dryers have ASME and CRN designed pressure vessels standard. Also, standard with the desiccant dryers is a 2-year package warranty and a 5-year valve warranty.

Request a Quote

Quincy Compressor

QHD Heatless Desiccant Dryer

QHD Heatless Desiccant Dryer

These dryers use a small portion of the dried compressed air to regenerate the off-line tower. The QHD series feature a low initial cost, a moderate operating cost and a low maintenance cost.

  • -40° to -100°F dewpoint
  • 100 – 3,400 cfm
  • 14% purge
  • Microprocessor control

QDHP Heated Purge Desiccant Dryer

QDHP Heated Purge Desiccant Dryer

These dryers use half the compressed air to regenerate the offline tower than the comparative heatless series. The initial setup costs are moderate and its operating costs and maintenance costs are low. This series can be purchased with the optional Quincy MicroBurst Regeneration (MBR) system, the only full-load energy saver available for use with heated purge desiccant air dryers. The MBR cuts purge requirements in half and greatly reduces heater “on” time. When equipped with the Quincy MBR, our Heated Purge dryers use 50% less energy. ROI can be realized within 5 months, depending on dryer size and local power costs.

  • -40° to -90°F dewpoint
  • 100 – 3,100 cfm
  • 3.5% to 7% purge
  • Low-watt density heaters

QDBP Blower Purge Desiccant Dryer

QDBP Blower Purge Desiccant Dryer

These dryers combine heat with forced ambient air for regeneration. The initial costs are relatively high while the operating and maintenance costs are moderately low.

  • +10° to -40°F dewpoint
  • 300-3,400 cfm
  • 2% Average Purge
  • NEMA 4

QMOD Heatless Modular Desiccant Dryer

QMOD Heatless Modular Desiccant Dryer

These compact dryers use a small portion of dried compressed air to regenerate the offline tower. The initial costs of these systems are low, as is its maintenance costs while the operating costs are moderate.

  • -40°F to -100°F dewpoint
  • 8 – 365 cfm
  • 18% purge
  • CRN Approved